Slideshow
Luthiery work
-
Quatuor
-
Woodwinds
- » Diatonic clarinet
- » Chalumeau
- » Irish Whistle
- » Breton flute
- » Breton bombards
-
Techniques
-
Percussions
-
Miscellaneous
-
Workshop
- » Enhanced Clamps
- » A two-handed gouge
- » Convert inches into millimeters
- » Finger planes
- » Instrument making vise
- » My Metric String action gauge
- » Purfling chisel
- » Purfling cutter
- » Radius sanding block
- » Resawing on the bandsaw
- » Soft vise jaws for the luthier
- » Thickness Gauge
- » Thickness Punch
- » Thickness sander
- » Toothed blades

Woodworking
-
Vintage furnitures restoration
-
Works
- » Plancha Trolley
- » Some works
- » Stool
-
Finishing recipes
-
Wood knowledge
-
Workshop
- » Bandsaw blade tension
- » Carving platform
- » Centering calipers
- » Cordless drill to corded
- » Disk Sander
- » Manual feeder blocks for table saw
- » My branding mark
- » Push Sticks
- » Router plane
- » Scartch Stock
- » Scraping plane
- » Silver soldering a bandsaw blade
- » Spokeshave
- » Startup and blade tension
- » Tenon saw
- » Tenoning Jig
Woodturning
-
My Woodturnings
- » Jewellery
- » Bowls
- » Miscellaneous
- » Pencils
- » Spinning tops
- » Lamps
-
Woodturning shop

Leather work
-
Tooling
Metal working
-
Metal working
Softwares
-
FOR THE LUTHIER
-
The softwares that I use
- » Bigprint
- » Qcad
- » Photofiltre
- » Audacity
- » Melody Assistant
-
Android in the workshop
Webmaster - Infos
Contact Me
Visits
visitors
visitors online
- Luthiery work
- Mandolins
- Quatuor
- Woodwinds
- Percussions
- Miscellaneous
- Woodworking
- WOODTURNING
- My Woodturnings
- Vintage furnitures restoration
- Works
- Finishing recipes
- Wood knowledge
- WOODTURNING
- Leather work
- Softwares
- FOR THE LUTHIER
- The softwares that I use
- Android in the workshop
- Some tricks
- Tooling
- The luthier workshop
- The woodturner's workshop
- Wood Workshop
- Miscelaneous
-
My tools on Homemadetools.net
Bluegrass F5 style mandolin making

http://www.labellenote.fr/data/en-articles.xml
Here is an F5 mandolin I have finished during the Summer 2012.
It is built under the original model of Lloyd Loar, in the early 1920s, for the Gibson company in the US.
This kind of build, introduced by the Great American luthier, somewhat reconciles the traditional guitar type luthiery with the one of the violin makers :
- carved and arched top and back
- f shaped soundholes
- A couple of tuning bars, similar to the bass bar from the violin
This build is quite similar as the Jazz archtop guitars, to a lower dimensional scale, but the technical difficulty is not lowered, see it is increased because of the small dimensions of some parts.
Here is a sound sample of this mandolin:
Specs :
- The plan is principaly the one from Roger Siminoff, with some details coming from the one from Don Mac Rostie sold by StewMac. Both these plans are quite acurate to the original model, but actually, there is no absolute standard. Even the historical Loar signed model vary slightly the one from the others.
- The neck to body assembly is a regular dove tail.
- The top is made of european spruce (from the Jura mountains, in france near Switzerland)
- The back, neck and sides are made of european maple, from the same area.
- The Headplate is from ebony for the top, and is black stained tulip wood veneer for the back.
- Ebony fingerboard.
- The inlaid dots on the fingerboard are made of breton abalone from Ploumanac'h, close to my home.
- The headplate inlays are Vietnameese mother of pearl. (There is no flat enough parts in the breton abalone).
- The nut and the points are made of bone from "chez Jacques", my preferred butcher in Louannec.
- Bindings are plastic...
- Strings are Dunlop DLN1618 Nickel Wound .011 .015 .026 .040
- The bridge is made of ebony (but looks like rosewood).
- the finish is a rubbed sunburst done using leather alcohol based stains (extremely penetrating, but a pleasure to use).
- Lacquer is KTM-SV
- The fingerboard extension over the top is scooped, with faux frets. Indeed, the original F5 model is characterized by this extension over the table, with
frets to play at the highest the A and E strings. This extension is really good looking, but really not convenient for players that keep hitting the fingerboard with the pick while playing. Like some luthiers, I prefered to get rid of the last frets, without giving up the aesthetic aspect. On the other hand, unlike most of the luthiers who leave that part black, I inlaid, like does Jamie Wiens (the best mando maker according to me), faux frets in the remaining 3 mm of ebony.
The "making of" this mandolin :
Here is the photo album of the making of this mandolin :
- The plates: top and back
- The assembly
- The neck and head
- Bindings and pearl inlays , see also how to make round pearl dots from abalone shells
- The setup
- The finishing work
- The finished mandolin
Take care, it's a bit long, but this is really what it takes !
Feel free to react and leave comments, either here or on my Facebook page.
Buxus.
Unless explicitly specified, all works presented on this page are released under a
Creative Commons BY-NC-SA International License.
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License
Last update : 03/12/2013 : 12:03
Category : Luthiery work - Mandolins
Page read 21866 times
Reactions to this article
Reaction #4
bonsoir,
comment vous contactez, faite vous les échiquiers en bois.Peut-on achettermerci d'avance.
________
Bonjour,
Me contacter ... ben c'est déjà fait
Pour le reste, je ne vends pas ce que je fabrique, mon but ici est d'échanger sur les idées, les techniques de fabrication ...
Pour un échiquier de fabrication artisanale, regardez du côté des artisans qui travaillent dans le domaine de la tabletterie.
Cordialement,
C.M
Reaction #3
Christophe-
Fantastic work! I would love to just sit and watch you work in your shop. I've learned so much just by observing the photos. I'm far less skilled, but I'll apply some of your techniques to some of my future woodworking. Thank you!
--Paul
__________________________________________________
Thanks for the kind words Paul !