https://www.labellenote.fr/en/categories/atelier-de-tournage/ Recent content in Atelier de tournage on La Belle Note Hugo -- gohugo.io en Tue, 06 Oct 2015 08:09:00 +0100 https://www.labellenote.fr/en/tournage_sur_bois/atelier_de_tournage/per%C3%A7agetransversalsurletour/ Tue, 06 Oct 2015 08:09:00 +0100 https://www.labellenote.fr/en/tournage_sur_bois/atelier_de_tournage/per%C3%A7agetransversalsurletour/ Transverse drilling on the lathe Here is a system allowing to drill side-way directly on the lathe. The drilling can be orthogonal to the axis of the lathe or at any desired angle. I have made this tool both for the wood lathe and the metal lathe. It is basically a standard Jacobs drilling chuck prolongated by a long 12mm diameter shaft. The shaft is powered by an electric hand drill. https://www.labellenote.fr/en/tournage_sur_bois/atelier_de_tournage/outildecreusagetelescopique/ Mon, 28 Sep 2015 23:20:00 +0100 https://www.labellenote.fr/en/tournage_sur_bois/atelier_de_tournage/outildecreusagetelescopique/ Telescopic hollowing tool Here is a woodturning deep hollowing tool inspired from the famous Rolly Munro hollowing system. [](https://www.woodworkersguide.com/2009/04/16/the- rolly-munro-articulated-hollower/) It is basically long handle, hollow, in which slides a very stiff bar allowing to reach the bottom of a deep vessel, and supporting a great cantilever beyond the tool rest. It also brings inertia in order to absorb the vibrations. Contrary to the Munro, I preferred using a square section bar, in order to apply better pressure onto the tool rest, preventing the cutting tip to be caught by the rotating work piece.