Christophe Mineau

La Belle Note

Partageons nos idées, partageons nos savoir-faire.

My tools

Galerie My tools

2-Minute Read

My tools

gallery My tools

Welcome to the gallery My tools.

Hollowing tool made with a carbide tip from Metiers et Passions ref 01L03146

Hollowing tool made with a carbide tip from Metiers et Passions ref 01L03146

The tip is fixed with a screw to a square steel rod.

The tip is fixed with a screw to a square steel rod.

Very efficient for end grain hollowing.

Very efficient for end grain hollowing.

One can make different length variants, here for deep hollowing, but I also have a short one.

One can make different length variants, here for deep hollowing, but I also have a short one.

A bedane, made from a carpenter bedane. works pretty well.

A bedane, made from a carpenter bedane. works pretty well.

A changeable tip scraper. Tips are made from an HSS planner blade, cut with the Dremel.

A changeable tip scraper. Tips are made from an HSS planner blade, cut with the Dremel.

Sanding gouge, with a rollerbearing inside.

Sanding gouge, with a rollerbearing inside.

Set of tools. Second for making rings

Set of tools. Second for making rings

My fixture for sharpening gouges on the wet grinder

My fixture for sharpening gouges on the wet grinder

Sharpens as well carving gouges as turning gouges.

Sharpens as well carving gouges as turning gouges.

My rotative decorating tool, inspired from the decorating elf.

My rotative decorating tool, inspired from the decorating elf.

A couple of tiny ball bearings, inserted in the shaft of the tool.

A couple of tiny ball bearings, inserted in the shaft of the tool.

Tip view. The bit is a Dremel one. I also use spherical and cylindrical shapes.

Tip view. The bit is a Dremel one. I also use spherical and cylindrical shapes.

Multi purpose holding tool. The tip is a HSS rod, sharpenned at both ends. Here the coving tool.

Multi purpose holding tool. The tip is a HSS rod, sharpenned at both ends. Here the coving tool.

Other end, the triangular tool for narrow grooves.

Other end, the triangular tool for narrow grooves.

Other carbide blade for tiny beads.

Other carbide blade for tiny beads.

6mm round skew. Very usefull to do tiny spheres or beads.

6mm round skew. Very usefull to do tiny spheres or beads.

Sharpenning of the round skew.

Sharpenning of the round skew.

The tip is an HSS barrel, brazed in a steel shaft.

The tip is an HSS barrel, brazed in a steel shaft.

A thickness caliper

A thickness caliper

A Stop allows to limit the closure and not the opening.

A Stop allows to limit the closure and not the opening.

Used to gauge a particular thickness. You can re-open the caliper without loosing the measurement.

Used to gauge a particular thickness. You can re-open the caliper without loosing the measurement.

A hand mandrel. Useful for holding any round cutting tool.

A hand mandrel. Useful for holding any round cutting tool.

All contents under Creative Commons BY-NC-SA license.

Say Something

Older readers comments

Recent Posts

Categories

About

Site de partage et d'échange de Christophe Mineau.